In short, both of these Hoovers are the same cleaner but with different accessories.
Step 1: Unplug And Prepare The Vacuum.It sounds obvious, but the first step to replacing the V6 battery is to make sure the vacuum isn’t plugged into the charger..
Performing any maintenance on a vacuum while it’s plugged into the mains power supply could risk electrocution.It’s also impossible to remove the V6 battery when it’s plugged in.. Once the vacuum has been unplugged, prepare your V6 for a battery change with the following three steps:.Detach the wand to make the vacuum easier to hold..
Empty the dust canister using the red latch..Remove the dust canister by pressing the red latch another time.. One of the screws holding the battery in place is located at the front of the battery, so you need to remove the bin to access it.. Related Article:.
How to Empty The Dyson V6.
Step 2: Remove Two Screws And The Old Battery.Sadly, it’s common for people to blame reduced suction on a faulty vacuum, but maintenance is often the solution!.
Many Shark vacuums also automatically detect a clog, which can cause the brush roll to stop spinning.You may even notice a strange noise or smell coming from the hose..
The good news is that it’s easy to clean your Shark’s hose.Let’s take a closer look at how to clean it in a safe and effective way..
(Editor: Ultra Dehumidifiers)